Backup Camera/Navigation Unlock Interface
For Select Dodge/Jeep/RAM vehicles
The BCI-CH41 is a Navigation Unlock integration interface that allows the factory navigation features of your Dodge/Jeep/RAM radio or the reverse camera to be used by the passenger at anytime. The BCI-CH41 will program the factory radio to allow the addition of a reverse camera input if the vehicle is not equipped with one from the factory (reverse camera sold separately). The interface also offers extra features such as: Audio/Video input capabilities, Eco Mode Memory, Steering Wheel Control (SWC) swap and a programmable 12v output.
Adds reverse camera input
Unlocks navigation entry while vehicle is in motion
A/V input capabilities
ECO-mode memory
Provides VES activation
Remote start climate retention
Allows custom configuration of factory SWC
Programmable 12V output to power a reverse camera, A/V switcher or a generic accessory output
Works with a variety of EchoMaster back-up cameras
Compatibility:
2015+ vehicles (excluding Durango & Grand Cherokee) must use firmware revision 1.1.2 or higher
Compatible with both 5" & 8" screens
RAM trucks with uConnect 5 but without audio SWC will not support the Navigation Unlock, Video in Aux or SWC Swap features.
RAM trucks equipped with a manual transmission will not support the forced Reverse Camera, Reverse Output Trigger or Video in AUX features.
The Chrysler 200 & Jeep Cherokee will not support the addition of an aftermarket Reverse Camera
The Dodge Challenger and Charger do not support the "Video in AUX" or "12v in AUX" features
An AVS21 must be used in order to use more than one video source with the BCI-CH41*
*If the vehicle has a factory backup camera, the AVS21 is necessary to retain the camera and add an additional source
Klik hier om een review achter te laten
Betalen zoals
u dat wilt
Vragen?
070 - 346 8088
Vóór 14:00 besteld
morgen in huis!